815 B19 Video Head
Compatibility between VARAVON B19 and Manfrotto 701HD When using Varavon B19 and Manfrotto 701 HD at the same time, the camera be mounted on each of the products without having to change the plate. 3 stage Pan-tilt Balance For a flexible action for each filming style and purpose, the video head has a function of pan-tilt balance adjustment of 0~3 stages. Vertical Spring We used a vertical spring that can hold up to 6 kg maximum rather than using a horizontal spring that is weak within the inner structure. Advanced Japanese Damping Oil Varavon did not use Taiwanese hydraulic oil, which is sensitive to temperature. We used the advanced Japanese damping oil that is also used in advanced tripods. 3-stage counter balance adjustment The tilting balance is adjustable from 0 step (no balance), 1 step, and 2 step. If the camera set is a DSLR...
815 Flat Fluid Head
The 815 Video Head with Flat Base is a two-way tripod head for video applications. If features a flat base and can be attached directly to tripods, monopods, slider dollies, or any other type of camera support equipment with a 3/8" screw. The head is optimized for loads up to 3.3 lb, but can safely support cameras weighing up to 4.4 lb. It can pan 360°, can tilt forward 90°, and can tilt back 65°. The pan handle can be attached to either side of the head for left- or right-handed operation. A sliding quick release plate comes with it and features a 1/4"-20 screw as well as a VHS pin to help keep the camera aligned correctly. The VHS pin can be depressed or removed for smaller camcorders and DSLRs that cannot use it. Manufactured with Japanese oil for a softer movement Instead of using a...
103 HD FLUID Video Head
The Varavon 103HD Fluid Video Head is an affordable tripod video head that weighs only 2.2 pounds and supports up to 13 pounds. Since it's lightweight, it can successfully be used mounted not only on tripods but also monopods. The mounting thread is 3/8" and the mounting base is flat. Accordingly, any tripod or monopod with a 3/8" screw and a flat base is compatible. Included are a pan bar, a long mounting plate, and a quick-release camera plate. The pan bar attaches to one of two rosette adapters. The mounting plate can be moved forward and back to enable finding the center of gravity with different cameras, and it has ruler markings on one side to help with positioning. The camera plate features support pads and a locking pin in addition to a 1/4" camera screw. Pan bar, mounting plate, and camera plate included Bubble level Aluminum build
75mm Half Ball Adapter
The 75mm Half Ball Adapter from Varavon allows you to mount a flat base tripod head on 75mm bowl tripods. It features a 3/8"-16 camera screw and a tie-down knob. Features Whats Included
Half Ball Riser
The Half Ball Riser from Varavon attaches to a camera slider with its flat base and acts as an intermediary, accepting video heads with a 100mm ball base--or 75mm with the conversion ring adapter (sold separately).
Half Ball Riser 100-75 CONVERTER
Half-ball riser basically support 100mm ball-head.If you are using 75mm Ball-headCombination of conversion ring75mm ball-head can be used. Mounting Example on Slidecam