Birdycam II

The Varavon Birdycam II is a handheld motorized 3-axis gimbal stabilization system for cameras weighing up to 5.5 pounds. It allows you to capture smooth, fluid shots whether you're actively...
$ 1,999.00

The Varavon Birdycam II is a handheld motorized 3-axis gimbal stabilization system for cameras weighing up to 5.5 pounds. It allows you to capture smooth, fluid shots whether you're actively following the subject, or the subject is simply passing by you. The camera platform is adjustable to support a variety of small to mid-sized cameras, including DSLRs, mirrorless cameras like the Sony a7s or GH4, and the Blackmagic Cinema Camera or Production Camera 4K.

The steering handle moves along three axes (up/down, left/right, and sideways), and your camera hangs suspended on a gimbal in the center and smoothly follows your movements. Even without the motors running, the gimbal balances out relatively smoothly, but with the motors on, the stabilizer counteracts unwanted movements and shake to keep your camera stable. Additionally, there's also a thumb-control joystick on the steering handle that lets you pan and tilt the gimbal without moving the handle itself.

The motors are powered by up to two Varavon batteries, with one battery provided with the stabilizer. A stand is also included for setting the Birdycam down. All the components come to you in a compartmentalized case with soft foam interior and requiring hardly any assembly.


Fits the
Sony a7S

Birdycam2 lets you be creative

Fits the
Lumix GH4

Birdycam2 lets you be creative



Birdycam2 Body

Main Features of the Birdycam2 Body


The I FLIGHT gimbal motors (PITCH,5208 ROLL & YAW 6208) makes it possible for a smooth stabilization
PCB Board
We use BaseCame Simple BGC (AlexMos) 32 bit controller and matching MOU. Check out our updates page for software and firmware updates.
Bluetooth Connection
Using an Android smartphone, the Bluetooth module provides an easy connection to the gimbals PID values.
One Touch Plate
With the 'one touch' camera plate, we created an easier way for the camera's directional movement and to be easily attached and detached.
Standard Dovetail
We use a standard dovetail on the handle bar and the main body for easy installation. This provides compatibility with the Wirecam and other optional products.
For easy and precise balancing of the gimbal, we have provided a calibration scale along with a baseline.
Locking Knob
Once locking knob has be engaged, it prevents the gimbal from any movement on that axis.



Handle and Handle Bar


Main Features of the Handle and Handle Bar


Upper Handle Bar
With the "flolding handle" method, it is possible to apply the 1/4" screw whole and attach optional accessories.
Upper Handle
We used a 1/4" locking knob on the handle for easy attathment and detachment from the handle bar. Installation of accessodes, such as the monitor and the joystick is possible.
Left and Right Handle Part
Using a 14mm bolt at the top of the handle bar, the handle can be mounted both at the top and bottom of the bar. Using a 16mm mounting hole at the bottom of the handle, the whole body can be mounted one stand or a Steadycam Arm.
By applying the LED, you are able to check the mode's movement status. The joystick is capable in being placed on either the left or right handle of the body. It also has five different functioning modes.




Main Features of the Stand


Main Bar
With the 1 /4", 3/8. screw hole and the water level, the stand can be applied on the tripod and could be checked for its' level of horizontality.
Stand Handle
The handle could easily be attached to the stand and the upper handle. It can also be used as a handle for the gimbal.
The knob enables height adjustment and the rubber part of the knob prevents it from slipping.




Suitable for 12V or 16V battery

 Select the voltage then press the Check Button for four seconds until the light on.

Main Features of the Battery


With the VARAVON T7412 battery, 7.4V/8.4V/12V(10,400mAH) voltage is available for selection. In addition to the gimbal, the battery is compatible with the Motor-Roid and Time-Roid.
Select the voltage then press the Check Button for four seconds until the light on.



Birdycam2 Bag

The Birdycam2 Bag was designed as a soft-hard case type in order
to protect the product from major/minor extremal shocks.
It may also be used for storage purposes and transferring products.

Main Features of the Birdycam2 Bag


Lock Buckle
We applied 4 lock buckles to protect the Birdycam.
The soft foam was designed to protect each part of the Birdycam from external shocks.







PCB Alexmos 32 Bit
MOTORS Pitch & Yaw & Roll
TYPE OF CLOSURE Stainless Steel(sus) Bolt Assembly


7412 Battery

CAPACITY Li-on 3.7V 10,400 mAh
OUT VOLTAGE DC 12V 2A, 8.4V 2A, 7.4V 2A
SIZE (14.1x8.2x2.2) cm



Whats Included







We use UPS or Fedex depending on the destination of deleivery. It takes about 4 to 5 business days to receive the shipment

Warranty Policy

General products have a 1 year manufacturer warranty and battery products have a 6 month warranty.

If item is broken by external force or is not manufacture defective, warranty is void. Warranty does not cover cables or bolts.

Repairs (if applicable):

If repairs are needed please email us at All repair items must be sent to our Korean office. You will be responsible for paying for your own shipping costs for repairing your item. Shipping costs are non-refundable.


We have a 30 day return policy. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

To be eligible for a return, your item must not be modified or destroyed. It must also be in the original packaging.

There will be a 15% restocking fee for any returned items.