ARMOR ATOMOS SHOGUN / ASSASSIN
Cage Design A design that does not interfere with the function of Atomos Shogun 3~4mm Over Frame The frame is 3~4mm wider than the width of the monitor to help prevent damage to the monitor Rubber Dampers Shock resistant built into the cage with rubber dampers located on four different corners Dual Fixed Cage Provides dual protection of the monitor with bolts on the top and bottom parts of the cage SSD Protection Keeps the SSD card protected and provides better access for card replacement Audio Clamp The U-shaped clamp protects the audio cable from any external shock HDMI Fixed Cable Secure the HDMI cable by tightening both bolts on each side of the cage Mounting Holes 3/8 and 1/4 inch mounting holes for accessories Shown with optional L-Bracket Can be...
COOLER ATOMOS SHOGUN W/O BATTERY
The Cooler Atomos Shogun Fan System attaches to the back of the Shogun cage via the optional "L" bracket and is able to keep your Shogun from getting too hot while it's in use. Importance of Cooling If the monitor’s temperature exceeds more than 140°F, the monitor may suddenly shut down. If this continues to happen, it could shorten the lifespan of the monitor. The temperature can be dropped significantly (approx. 10-15 degrees) by using the cooler. (There may be differences depending on the environment) Cooling Process The cooler quickly disperses the heat generated by the monitor. It may also be fitted to other recording equipment. 1/4 Hole A ¼ inch hole applied on all four sides of the cooler Mounting a Magic Arm You may mount the Magic Arm on the ¼ inch hole of Varavon’s cooler. Mounting a L-bracket You...